Addressable Sounder Base and Addressable Sounder VID Base
The P80SB is an addressable sounder base specifically for use with the ZETTLER addressable detectors. The base incorporates a fire alarm sounder that carries its own address so it can be monitored and controlled from the fire alarm control panel, which is independent of the detector fitted to the base. Both power and communications for the sounder and detector are provided by the two-wire digital loop. This helps to reduce installation costs as no additional wiring is required. Additionally, the P80AIB houses an addressable LED beacon to provide a visual indicator otherwise known as a VID.
Devices per loop
Up to 231 (*)
Up to 149 (**)
0.5 / 1Hz
(Diameter x H) mm
Sound output @ 1m
Up to 90dBA
Up to 90dBA
(*) Sounder at high volume, 1 A loop.
(**) Beacon at 0.5 Hz with sounder at high volume, 1 A loop.
Loop quantities are for guidance only and should be verified with the loop calculator.
A compact and discrete solution
One point of installation for detector, sounder and visual indicator with no additional wiring
Reflective Sound Monitoring (RSM)
Light is electronically monitored by the control panel
Independent addressable control of the sounder and beacon
Built-in line isolator
Select the tone, volume and flash rate using panel configuration software
15 selectable tones. Allows users to select the tone with which they are most familiar
Realistic conventional bell tone
4 selectable volumes
2 selectable flash rates
Different tones can be used for fire alarm and class change
VIDs and sounders are synchronised over the entire loop
A locking pin supplied with the base which prevents the unauthorized removal of the detector
Replace legacy LPSB3000 and LPAV3000
Click here to watch the New Addressable Device Series Video